Bamboo… flats, prefolds, or inserts. And other Cloth Diaper Ramblings

We are a purely cloth diapered household,  after the merconium quit flowing and we ran out of hospital supplied diapers, our little LJ’s bum was happily swathed in cloth.   Early in our pregnancy, my aunt found out we were planing on using cloth diapers, and she so nicely sent us a bunch of samples of different types from her work.  The first thing I realized was I did not like any of the designs.  They either took way to much time to assemble or they required purchasing dozens in each size.  Our choice to go cloth was mainly financial, so the thought of forking out 4-500$ for diapers seemed to defeat the purpose.  Yes, I know there are lots of other positive reasons to cloth diaper,  they were just perks over the financial savings.

Since I am a somewhat competent seamstress I decided to try and make my own diaper covers to use.  We purchased approximately 5 dozen cotton flat folds, half in a small size which I took the time to sew into prefolds and the other half were larger but I left them flat.    Before LJ was born I would spend hours on the internet searching out ways of folding the flats and prefolds, practicing each and every method.  I even purchased some neat plastic clips that I thought would come in highly useful (instead of safety pins).  In the end, use determines function… I had made 6 PUL lined cotton covers which closed with endustrial strength velcro and were edged with FOE (Fold over elastic).  We then folded the prefolds and later the flat folds into long rectangles and laid them in the covers like maxi-pads.  They never slipped or moved around, and when changing time came.  Whoop! We removed the soiled cotton rectangle, whiped the booty and the PUL with a wet cloth and replaced with a fresh liner.  We could use aprox 4-6 liners before changing the cover.  Face it, we became spoiled. It was so easy using this method, we could do a small load in the washer and a short dry.

When LJ hit approximately 19lbs, and was able to undo the velcro herself, I decided to search out some new designs.  One day in a weak moment, I purchased a diaper cover off of Etsy.  It was my favorite color (orange) and a great price.  Even better, it was a different design than what we had been using, so we could try something new.  This cover was PUL turned inside out on the outside and lined with fleece.  Very soft and cushy.  The only problem was, as soon as the liner got wet or soiled you had to change the whole thing!  We would get  a maximum of 2 liners out of it!   I do not fault the Etsy designer, the sewing job was superb, it was the whole design that we did not like.  I then decided to make the next 6 covers the same way I had before, but changing the velcro to KAM snaps (neat plastic snaps, a breeze to assemble).  The only problem was that the large flats that we used as inserts are getting to small.

I was able to get my hands on some Bamboo fleece.  I had read all kinds of wonderful things about this material, and I must admit I fell in love with it as soon as it arrived at my door.  It was so soft and supple, I just sat there rubbing on it for a while.  So I decided to do an experiment, I made 3 different kinds of liners out of it.  One simple Flat, One Prefold, and One insert with ZORB sandwiched inside.   We have been using them for about a month now and there are some definate pro’s and cons to this material.

First, the bamboo holds ALOT of liquid. It’s amazing the amount it can hold.  The problem is it does not wick well away from the source.   So at the end of the night when we go to change LJ, the side of the liner closest to her is SOAKED, where as the side against the diaper cover is dry.

Second, with the cotton flats and prefolds we were used to doing a small load in the washer and dryer with a relatively short dry time.  We could even hang them up to dry quickly if the mood ever struck us.  The bamboo flats are the same.  The prefolds and the inserts with the ZORB are a different story.  The prefold had to be run twice through the dryer… the one with the ZORB insert, went through a third time and still ended up having to be left out to dry over a couple of days.

Lastly,  the flat folds need to be sized correctly.  They take up alot of space and are less forgiving than cotton.  But as with the cotton inserts, you can always combine sizes to increase absorb-ability.

On another note, bamboo is one of those wonderful fabrics that the more times it gets washed the more absorbent it gets!

So for the foreseeable future, I plan on introducing more bamboo flats into our diaper stash.   For all you cloth diapered families out there, I hope you have found something that truly works for you!  And of course if you are in need of supplies, my Etsy shop has covers for sale.  Bamboo flats, prefolds and ZORB liners are a special request item and will only be made as a custom order, depending on the sizes you need!


Update 10/13/11

Well we have used the bamboo flats for a little over a month now, and have found that every-time we use those inserts Our little LJ ends up with OPEN sore diaper rash… even if we catch the first flow!  We also have found that it does not adhere to any of the solids and they end up squeezing out the side.  So we have pulled our stash out of rotation.  Its beautiful fabric, soft, and very absorbant.  But our little LJ’s bum enjoys cotton.

My suggestion to you?  buy one or two to try for atleast a month before you dedicate your entire diaper budget.  Make sure you are one of the lucky families that can use this wonderful fabric!





Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: